Aurora™ - Heat Transfer Vinyl

Our newest color-shifting heat transfer vinyl!

Get swept away by the color shifting surrealness of Aurora™ HTV! Each color holds a whole spectrum of shades that glisten and gleam as the material moves. With a woven appearance and glossy finish, Aurora is stunning as a stand-alone and when combined with other types of HTV. Apply Aurora with a heat press or home iron to cotton, polyester, cotton/poly blends, and more for fantastic looking logos that keep their color opacity on light and dark fabrics. Available in 10 iridescent colors, Aurora is your next show-stopper for garment and décor customizations!

Aurora is 100 Microns / 7.48 Mils and is a PU composition.

Aurora Features

Aurora applies to:


	100% Cotton	100% Polyester	Poly/Cotton Blends

Siser Cutter Settings

Blade: 45°/60° Force: 30-35 Offset: .250 Speed: 10

Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions

Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier completely cold

Heat Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 15 seconds
• Peel carrier completely cold

Click here for a printable version of all HTV application instructions

Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash cold. Tumble dry low. Do not bleach or dry clean