Glitter Heat Transfer Vinyl

Attractive Designs with Eye Catching Sparkle!

Bling out plain designs for maximum appeal with the best Glitter HTV on the market! Available in over 30 vibrant colors, Glitter contains maximum sparkle without shedding any glitter flakes. Kids of all ages love the shimmer and pop, and since it’s CPSIA Certified it’s safe to apply on kids clothing. But did you know you can also sublimate directly onto white Siser Glitter!? Watch the video on how to sublimate here! Glitter can be cut with laser systems.

Glitter is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.

Available Colors

Fluorescent Colors

Can Be Sublimated

Specifications: PU Composition • Pressure sensitive backing • Glitter finish • 325 Microns/12.8 Mils • 45°/60° blade • Do not layer

CUTTER SETTINGS

Cricut:

Blade: Standard
Setting: Iron On+

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Smooth
Speed: 8
Force: 11

Scan N Cut:

Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 5

Roland GS/GX-24:

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 17
Tool: CB09U+0
Speed: 30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

APPLICATION INSTRUCTIONS

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 15-20 seconds
• Peel carrier warm