Address

Siser North America
12900 Hall Rd. Suite 270
Sterling Heights, MI 48313

Contact Info

Phone: 866.301.9409

Fax: 440.550.8008

VideoFlex Glitter Heat trasnfer VinylVideoFlex glitter
VideoFlex Glitter
VideoFlex Glitter Heat Transfer VinylVideoFlex Glitter
VideoFlex® Glitter 2017-04-05T09:22:21+00:00

VideoFlex® Glitter heat Transfer Vinyl

Make Your Designs Shimmer and Sparkle!

VideoFlex Glitter Heat Transfer Vinyl is a fashionable alternative to Glitter by Siser. VideoFlex Glitter is specially constructed to be soft to the touch. Glitter flakes are embedded in the material so that you get a smooth finish to your designs. VideoFlex Glitter is available in two classic colors, gold and silver. Looking to layer? VideoFlex Glitter can be layered for ultimate sparkle! Think outside the box and use VideoFlex Glitter on shoes, belts, and other hard-to-print items.  If you like to keep it simple, VideoFlex Glitter can be applied to t-shirts, hoodies, sweats and scrubs too!

VideoFlex Glitter is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories

0
Available Colors
0
Awesome Shimmer
0
Percent Bling!
VideoFlex Glitter SilverVideoFlex Glitter Gold

Specifications: PU Composition • Static backing • Glitter finish • 110 Microns/4.3 Mils • 45°/60° blade • Can be layered

Cricut®:

• Blade: Standard
• Setting: Iron-on

Silhouette Cameo:

• Blade: Standard, 3
• Setting: heat Transfer
• Material: Smooth
• Speed: 8
• Thickness: 6

Brother:

• Blade: 2
• Cut Speed: 1
• Cut Pressure: 1

Roland GX-24:

• Blade: 45°
• Force: 80g-90g
• Speed: 25-50 cm/s

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
• Cover completed design and press for 5-10 seconds
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F / 150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold
• Cover and reheat for 2-3 seconds;
VideoFlex Glitter Applies to:

• 100% polyester
• Poly/cotton blends
• Leather
• Nylon

Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean

Check the following links for more VideoFlex Glitter information and inspiration

VideoFlex Glitter Design
VideoFlex Glitter Blog Post