Brick 600

Brick® 600 - Heat Transfer Vinyl

Our thickest heat transfer vinyl - now easier to cut and apply!

Thin or thick, materials of all sizes have a place in garment decorating. Brick® 600 heat transfer vinyl by Siser® is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s matte finish looks great on caps, bags, and is ideal for left chest logos. This trendy look can be seen on sports apparel all over the globe. When used as a base layer and covered with EasyWeed® Stretch, the combination gives a great embossed look. The next time you feel your design could benefit from a boost in height, consider giving it some dimension with Brick 600 by Siser!

Brick 600 is 600 Microns / 23.6 Mils and is a PU composition.

Brick 600 is Layerable only if using the embossed method of heat application.

Brick 600 Features

 Brick 600 Shirt Design
Brick 600 White   Brick 600 Black   Brick 600 Red   Brick 600 Yellow   Brick 600 Green   Brick 600 Royal Blue   Brick 600 Navy Blue   Brick 600 Fluorescent Yellow   Brick 600 Fluorescent Orange   Brick 600 Flurorsecent Green
Brick 600 Fluorescent Pink   Brick 600 Fluorescent Blue                              

Brick 600 applies to:
100% Cotton 100% Polyester POly/Cotton Blends
100% Cotton 100% Polyester Poly/Cotton Blends

Siser Cutter Settings


Blade: 60°    Force: 12-17    Offset: .250    Speed: 10

Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions


Home Iron Instructions

 • Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 20 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 10-15 seconds
• Peel carrier cold
Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 310°F/155°C (EasyPress® users add approx. 30°)
• Use medium pressure for 20 seconds
• Peel carrier cold

Click here for a printable version of all HTV application instructions

Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.