Print and Cut Full-Color Designs with Incredible Stretch and Rebound!
Impress your customers with beautiful, vibrant graphics that are also lightweight and durable. Siser’s ColorPrint PU is a thin, stretchable print and cut material available in two finishes for all your project needs! Choose from ColorPrint PU Matte or Gloss. Compatible with eco-solvent, solvent, and latex based printers/cutters, ColorPrint PU creates great full color graphics. ColorPrint PU is thin enough to provide a great hand and stretchable enough for most performance wear. Plus it’s easy to use! Just print, cut, mask, and press!
ColorPrint PU is approximately 70 microns/2.8 Mils, and is a PU composition
Not compatible with Inkjet, toner, or sublimation printers.
ColorPrint PU applies to:
• Set heater/dryer to 113°F / 45°C - 122°F / 50°C
• If printing heavy saturation ink, allow to dry 1 hour before cutting
• Print, cut ,and weed your design.)
• Mask with TTD Easy Mask or TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Cover design with Heat Transfer Cover Sheet
• Apply design at 295°F / 146°C with medium pressure for 15 seconds
• Peel carrier hot