Inflation isn’t always bad! In fact, when it comes to Heat Transfer Vinyl it’s pretty cool. Easy™Puff expands after heat application to create a 3-D appearance with a unique texture every time. Like our other Easy products, EasyPuff is simple to cut, weed, and apply. But you’ll be surprised to find EasyPuff up to triple its height after applying heat just once! The puffed up product looks great with designs that favor simple shapes and large elements since small cavities will get swallowed up in the puffing process. Imagine what you can make with this magical HTV- from fluffy bunnies to elevated elements and larger than life lettering. It’s all possible with EasyPuff!
Easy Puff is 140 Microns / 5.5 Mils and is a PU composition.
Easy Puff applies to:
Siser Cutter Settings
Blade:45°/60°Gram Force: 5-10Offset:.250Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Heat Press Instructions
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 280°F/138°C
• Use medium / firm pressure for 8-10 seconds
• Peel carrier hot
Important Application Notes:
Easy Puff is designed to withstand only one heat application. Repeated applications will “flatten” the puff effect permanently. It is recommended to apply Easy Puff last when used with other materials. Because achieveing proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.
*Texture of applied material can vary from lightly textured to heavily textured.
Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Tumble dry on low setting. Do not dry clean.
Wash inside out for best results. Liquid fabric softener not recommended.