EasyPatterns

EasyPatterns® Heat Transfer Vinyl

This Product is Being Phased Out. See the New EasyPatterns Plus

EasyPatterns® are the wow factor you're looking for! These pre-printed patterns eliminate the need for layering multiple solid colors, therefore eliminating extra weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that's perfect for your next project. EasyPatterns were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut in the positive (do not mirror) with the pattern facing up, weed away the excess from the static carrier, and mask with TTD High Tack and a squeegee. After heat application, the mask releases quick and easy while still warm. Mix and match EasyPatterns with other types of Siser HTV for extraordinary styles. Just be sure to keep EasyPatterns as the top layer for best results. With a semi-gloss finish and soft hand, EasyPatterns are the star of the show even when applied with a home iron!

EasyPatterns are 80 Microns / 3.1 Mils and are a PU composition.


EasyPatterns features

EasyPatterns Decorated Shirt

EasyPatterns applies to:


100% Cotton 100% Polyester Poly/Cotton Blends Leather
100% Cotton 100% Polyester Poly/Cotton Blends Leather



Settings for Craft and Professional Cutters


Cricut® Explore Air

 

Cricut® Maker

 

Brother® Scan N Cut DX

 

Silhouette Cameo® 4

     
Blade: AutoBlade, Standard
Setting: Iron On
 
Blade: AutoBlade, Fine-Point 
Setting: Heat Transfer, (Non-Cricut)
 
Blade: AutoBlade
Cut Speed: 5   Half Cut:Auto
 
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6    Speed: 8

Roland® GX/GS-24

 

Graphtec®

 

US Cutter® Titan 2 & 3

 

Mimaki® CG-60SR III

     
Blade: 45°
Gram Force: 80-90
Offset: .250   Speed: 30-50 cm/s
 
Blade: 45°
Gram Force: 8-9
Tool: CBO9U+0   Speed: 30 cm/s
 
Blade: 45/60°
Gram Force: 60-65
Speed: 300 mm/s * Blade Advancing Varies
 
Blade: 45°
Gram Force: 90
Offset: 30   Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Don't see your cutter listed? Click here to download a .pdf of various other cutters.



Application Instructions


Home Iron Instructions

• Cut design in positive (do not mirror)
• Mask with TTD Easy Mask or TTD High Tack Mask
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 10 seconds
• Peel carrier hot cold

Heat Press Instructions     

• Cut design in positive (do not mirror)
• Weed excess material
• Mask with TTD Easy Mask or TTD High Tack Mask    
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions



Recommended Accessories: Siser Weeder, Siser Squeegee, Multipurpose Paper or Heat Transfer Cover Sheet, TTD High Tack Mask or TTD Easy Mask

Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.