EasyReflective

EasyReflective® - Heat Transfer Vinyl

The easiest reflective HTV you’ve ever used!

EasyReflective is Siser’s reflective HTV with a frosted pressure sensitive (sticky) carrier! This highly reflective heat transfer vinyl is truly an exceptional polyurethane product due to its glass bead construction that illuminates the darkest of conditions. The pressure sensitive carrier allows you to re-stick lifting material or replace a piece that’s accidentally weeded away. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, construction crew uniforms, and more!

EasyReflective is 140 Microns / 5.5 Mils and is a PU composition.




EsyReflective Features

EasyReflective on Vests
  EasyReflective  

EasyReflective applies to:


Nylon 100% Cotton Polyester Poly/Cotton Blends
Nylon 100% Cotton 100% Polyester Poly/Cotton Blends



Settings for Craft and Professional Cutters


Cricut® Explore Air

 

Cricut® Maker

 

Brother® Scan N Cut DX

 

Silhouette Cameo® 4

     
Blade: AutoBlade, Standard
Setting: Vinyl +
 
Blade: AutoBlade, Fine-Point 
Setting: Heat Transfer (Non-Cricut)
 
Blade: Autoblade
Cut Speed: 5   Half Cut: Auto
 
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6 Speed: 8

Roland® GX/GS-24

 

Graphtec®

 

US Cutter® Titan 2 & 3

 

Mimaki® CG-60SR III

     
Blade: 45°
Gram Force: 80-90
Offset: .250   Speed: 30-50 cm/s
 
Blade: 45°
Gram Force: 8-9
Tool: CBO9U+0   Speed: 30 cm/s
 
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s * Blade Advancing Varies
 
Blade: 45°
Gram Force: 80
Offset: 30   Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Don't see your cutter listed? Click here to download a .pdf of various other cutters.



Application Instructions


Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 10 seconds
• Peel carrier warm

Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier warm (at least 15 seconds off press)

Click here for a printable version of all HTV application instructions



Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.