EasySubli HTV

EasySubli® Heat Transfer Vinyl

The Latest Innovation in Sublimation

You already know Siser® Glitter HTV can be sublimated, but what if you want to spare yourself the sparkle? Siser has the sublimation solution for you! Now offering, EasySubli®, the matte heat transfer vinyl that’s receptive to sublimation inks! Siser EasySubli HTV is the key to decorating colored polyester (excluding sublimated polyester garments) and cotton blends. Never be limited to white polyester again when you switch to EasySubli!

Achieve the brightest colors and best results when paired with the specially developed printing profile and Siser EasySubli Inks by Sawgrass. Available for the Virtuoso SG400 and SG800, Siser EasySubli Inks can do more than just print on EasySubli! Use Siser EasySubli Inks to achieve all your standard dye-sub needs as well, so there’s no need to switch out inks between projects. The low application temperature of 311°F even allows you to decorate heat sensitive fabrics like tri-blends and rayon!

EasySubli is approximately 220 microns/8.67 Mils


EasySubli Features

 EasySubli Shirt Deisgn
    EasySubli  

EasySubli Applies To:

Cricut:  Blade: Standard   Setting: Iron-on
Silhouette Cameo:  Blade: Standard, 3  Material: Heat Transfer, Smooth  Speed: 8  Force: 6
ScanNCut:  Blade: Standard, 2  Cut Speed: 1  Cut Pressure: 1


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Roland GX/GS-24:  Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 25-50 cm/s
Graphtec:  Blade: 45°  Force: 8-9  Tool: CB09+0  Speed: 30 cm/s
MH, SC2, LP3, and Titan1:  Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  *Blade Advancing Varies
Titan 2 & 3:  Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions (Heat Press):

Print, cut, and weed material
Preheat garment for 2-3 seconds
Apply design at 311°F/155°C
Use medium pressure for 15 seconds
Peel EasySubli Mask hot
Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Heat Transfer Cover Sheet
EasySubli Mask
Squeegee

 Compatible Sublimation Inks:

Siser EasySubli Inks by Sawgrass

 Laundering:

Wait 24 hours before first wash
Machine wash cold with mild detergent
Machine dry on low setting
Do not dry clean or use bleach