Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10
|
|
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Home Iron Instructions
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• Peel carrier hot
• If areas of design lift after application, replace
cover sheet and re-press for 5-10 seconds
|
Heat Press Instructions
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C(EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot
|
Click here for a printable version of all HTV application instructions
|