EasyWeed^® EcoStretch™ - Heat Transfer Vinyl

The lightweight, water-based HTV that stretches the boundaries of what's possible

EasyWeed EcoStretch heat transfer vinyl by Siser® is lightweight, water-based, and applies at a low temperature so it’s perfect for performance fabrics, spandex blends, and any other project that needs a little extra bounce back. Works with all craft cutters and can be applied with either a home iron or a heat press.

EasyWeed is 90 Microns / 3.5 Mils and is a water-based polyurethane composition.

EasyWeed EcoStretch Features

EasyWeed EcoStretch applies to:


	100% Cotton	100% Polyester	Poly/Cotton Blends	Leather	Lycra® / Spandex

Siser Cutter Settings

Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10

Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions

Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• Peel carrier hot

Heat Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 250°F/121°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot

Click here for a printable version of all HTV application instructions

Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash cold. Tumble dry low. Do not bleach or dry clean.