EasyWeed® Electric

EasyWeed Electric - Heat Transfer Vinyl

Electrify Your Look With Unique Finishes

If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered.

EasyWeed Electric is 90 Microns / 3.5 Mils and is a PU composition.




EasyWeed® Electric Features

EasyWeed Electric Shirt Design
EasyWeed Electric Pearl   EasyWeed White Opal   EasyWeed Electric Tungsten   EasyWeed Electric Copper   EasyWeed Electric Cranberry   EasyWeed Electric Red   EasyWeed Electric Orange   EasyWeed Electric Yellow   EasyWeed Electric Lime   EasyWeed Electric Green
EasyWeed Electric Olive   EasyWeed Electric Teal   EasyWeed Electric Peacock Teal   EasyWeed Electric Spearmint   EasyWeed Electric Blue   EasyWeed Electric Columbia Blue   EasyWeed Electric Frosted Blueberry   EasyWeed Electric Grape   EasyWeed Electric Purple   EasyWeed Electric Cherry
            EasyWeed Electric Pink   EasyWeed Electric Rose Gold   EasyWeed Electric Silver Lens   EasyWeed Electric Gold Lens            

EasyWeed Electric applies to:


100% Cotton 100% Polyester Poly/Cotton Blends Leather
100% Cotton 100% Polyester Poly/Cotton Blends Leather



Settings for Craft and Professional Cutters


Cricut® Explore Air

 

Cricut® Maker

 

Brother® Scan N Cut DX

 

Silhouette Cameo® 4

     
Blade: AutoBlade, Standard
Setting: Vinyl +
 
Blade: AutoBlade, Fine-Point 
Setting: Heat Transfer (Non-Cricut)
 
Blade: Autoblade
Cut Speed: 5   Half Cut: Auto
 
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6 Speed: 8

Roland® GX/GS-24

 

Graphtec®

 

US Cutter® Titan 2 & 3

 

Mimaki® CG-60SR III

     
Blade: 45°
Gram Force:80-90
Offset: .250   Speed: 30-50 cm/s
 
Blade: 45°
Gram Force:8-9
Tool: CBO9U+0   Speed: 30 cm/s
 
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s * Blade Advancing Varies
 
Blade: 45°
Gram Force: 80
Offset: 30   Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Don't see your cutter listed? Click here to download a .pdf of various other cutters.



Application Instructions


Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions



Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.