EasyWeed^® Extra - Heat Transfer Vinyl

Our Best-Selling Heat Transfer Vinyl - Now for Nylon!

EasyWeed® Extra shares almost all the great benefits of EasyWeed, with the added bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier sheet so you can cut detailed designs and weed them effortlessly. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all the applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra - with its semi-gloss finish, can be layered, extending your creativity and allowing you to say "yes" to more complicated designs.

EasyWeed Extra is 90 Microns / 3.5 Mils and is a PU composition.

EasyWeed Extra applies to:


	Nylon	100% Cotton	100% Polyester	Poly/Cotton Blends	Leather

Siser Cutter Settings

Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10

Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions

Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• Peel carrier hot or cold
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds

Heat Press Instructions

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds

Click here for a printable version of all HTV application instructions

Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.