EasyWeed® Sub Block - Heat Transfer Vinyl

We've Got Dye Migration Covered!

Standard heat transfer vinyl isn’t designed for use on sublimated polyester. If you apply regular HTV to a sublimated garment, you may experience “dye migration.” Dye migration is when the sublimation inks in the garment bleed into the heat transfer vinyl and change the color of the HTV. EasyWeed Sub Block is specially formulated to block most dye migration and leave you with a crisp finished product! EasyWeed Sub Block is ideal for the popular digital camo and motocross jerseys! You can even layer other Siser® materials on top to create a more colorful look!

EasyWeed Sub Block is 110 Microns / 4.3 Mils and is a PU composition.


EasyWeed Sub Block Features

EasyWeed Sub Block shirt Design
                EasyWeed Sub Block White   EasyWeed Sub Block barcelona Yellow                

EasyWeed Sub Block applies to:


100% Polyester Sublimated Polyester
100% Polyester Sublimated Polyester



Settings for Craft and Professional Cutters


Cricut® Explore Air

 

Cricut® Maker

 

Brother® Scan N Cut DX

 

Silhouette Cameo® 4

     
Blade: AutoBlade, Standard
Setting: Vinyl +
 
Blade: AutoBlade, Fine-Point 
Setting: Heat Transfer (Non-Cricut)
 
Blade: Autoblade
Cut Speed: 5   Half Cut: Auto
 
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6 Speed: 8

Roland® GX/GS-24

 

Graphtec®

 

US Cutter® Titan 2 & 3

 

Mimaki® CG-60SR III

     
Blade: 45°
Gram Force: 80-90
Offset: .250   Speed: 30-50 cm/s
 
Blade: 45°
Gram Force: 8-9
Tool: CBO9U+0   Speed: 30 cm/s
 
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s * Blade Advancing Varies
 
Blade: 45°
Gram Force: 80
Offset: 30   Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Don't see your cutter listed? Click here to download a .pdf of various other cutters.



Application Instructions


Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 265°F/130°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions



Recommended Accessories: Siser Weeder, Multipurpose Paper or Heat Transfer Cover Sheet

Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not dry clean