EasyWeed® Stretch Heat Transfer Vinyl

Flexible Style for Performance Wear and More!

Activewear has met its match! EasyWeed Stretch by Siser delivers all the benefits of our EasyWeed heat transfer vinyl and combines it with super stretchability to create one remarkable HTV! The thinnest of any Siser material, EasyWeed Stretch has a true matte finish that’s available in over 20 popular colors! While EasyWeed Stretch is ideal for performance apparel from spandex to dri-fit, the soft hand and light weight often make it a favorite for other garments such as: tank tops, onesies, and almost anything else. Check out the Top Ten Siser Heat Transfer Vinyl Tips for other great uses for HTV! EasyWeed Stretch can even be cut with laser systems.

EasyWeed Stretch is 85 Microns / 3.35 Mils and is a PU composition.




 
EasyWeed® Stretch White EasyWeed® Stretch Gray EasyWeed® Stretch Silver EasyWeed® Stretch Charcoal EasyWeed® Stretch Black EasyWeed® Stretch Burgundy EEasyWeed® Stretch Red EasyWeed® Stretch Bright Red
EasyWeed® Stretch Coffee EasyWeed® Stretch Chestnut EasyWeed® Stretch Calypso Coral EasyWeed® Stretch Orange EasyWeed® Stretch Sun EasyWeed® Stretch Yellow EasyWeed® Stretch Lemon EasyWeed® Stretch Gold
EasyWeed® Stretch Dark Gold EasyWeed® Stretch Green EasyWeed® Stretch Sweet Mint EasyWeed® Stretch Sea Glass EasyWeed® Stretch Totally Teal EasyWeed® Stretch Frosty Mint EasyWeed® Stretch Pale Blue EasyWeed® Stretch Celestial Blue
EasyWeed® Stretch Royal Blue EasyWeed® Stretch Navy Blue EasyWeed® Stretch Cobalt Blue EasyWeed® Stretch Royal Purple EasyWeed® Stretch Wisteria EasyWeed® Stretch Lilac EasyWeed® Stretch Purple Berry EasyWeed® Stretch Bright Orchid
EasyWeed® Stretch Passion Pink EasyWeed® Stretch Bubble Gum EasyWeed® Stretch Coral EasyWeed® Stretch Ballerina Pink EasyWeed® Stretch Rose Gold      

EasyWeed Stretch Applies To:

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 4   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 1


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Roland GX/GS-24:   Blade: 45°   Gram Force: 60-70   Offset: .250   Speed: 30 cm/s

Graphtec:   Blade: 45°   Force: 9-10   Tool: CB09U+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with firm pressure (do not slide iron)
• Press each section of design for 20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover design with Multipurpose paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 20 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions

Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean