EasyWeed® Sub Block Heat Transfer Vinyl

We've Got Dye Migration Covered!

Standard heat transfer vinyl isn’t designed for use on sublimated polyester. If you apply regular HTV to a sublimated garment, you may experience “dye migration.” Dye migration is when the sublimation inks in the garment bleed into the heat transfer vinyl and change the color of the HTV. EasyWeed Sub Block is specially formulated to block most dye migration and leave you with a crisp finished product! EasyWeed Sub Block is ideal for the popular digital camo and motocross jerseys! You can even layer other Siser® materials on top to create a more colorful look!

EasyWeed Sub Block is 110 Microns / 4.3 Mils and is a PU composition.


EasyWeed Sub Block Features

 EasyWeed Sub Block shirt Design
      EasyWeed Sub Block White   EasyWeed Sub Block barcelona Yellow      

EasyWeed Sub Block Applies To:

Cricut:   Blade: Standard   Setting: Paper+
Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4
Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 3


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 30 cm/s
Graphtec:   Blade: 45°   Force: 9-10   Tool: CB09+0   Speed: 30 cm/s
MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 85-90   Speed: 300 mm/s    *Blade Advancing Varies
Titan 2 & 3:    Blade: 45°/60°   Gram Force: 65-70   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold		 Application Instructions (heat press)

• Cover design with Multipurpose paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 265°F/130°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions

Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Heat Transfer Cover Sheet

 Laundering:

Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Hang item to dry
Do not dry clean