EasyWeed® Heat Transfer Vinyl

The most trusted heat transfer vinyl brand in the world

Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.

EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.




EasyWeed® White   EasyWeed® Gray   EasyWeed® Silver   EasyWeed® Charcoal   EasyWeed® Black   EasyWeed® Matte Black   EasyWeed® Brown   EasyWeed® Dark Maroon
EasyWeed® Maroon   EasyWeed® Burgundy   EasyWeed® Red   EasyWeed® Bright Red   EasyWeed® Hibiscus   EasyWeed® Cardinal   EasyWeed® Texas orange   EasyWeed® Orange
EasyWeed® Orange Soda   EasyWeed® Sun   EasyWeed® Yellow   EasyWeed® Lemon   EasyWeed® Gold   EasyWeed® Vegas Gold   EasyWeed® Cream   EasyWeed® Tan
EasyWeed® Chocolate   EasyWeed® Lime   EasyWeed® Green Apple   EasyWeed® Green   EasyWeed® Cadette Green   EasyWeed® Dark Green   EasyWeed® Turquoise   EasyWeed® Powder Blue
EasyWeed® Sky Blue   EasyWeed® Pale Blue   EasyWeed® Royal Blue   EasyWeed® Navy Blue   EasyWeed® Purple   EasyWeed® Wicked Purple   EasyWeed® Lilac   EasyWeed® Passion Pink
EasyWeed® Pink   EasyWeed® Bubble Gum   EasyWeed® Melon   EasyWeed® Light Pink   EasyWeed® Fluorescent Pink   EasyWeed® Fluorescent Raspberry   EasyWeed® Fluorescent Coral   EasyWeed® Fluorescent Orange
EasyWeed® Fluorescent Yellow   EasyWeed® Fluorescent Green   EasyWeed® Fluorescent Blue   EasyWeed® Glow in the Dark        

EasyWeed Applies To:

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions

Recommended Accessories:

Siser Weeder
Multipurpose Paper or Heat Transfer Cover Sheet

Laundering:

• Wait 24 hours before first wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean