Metal HTV

Metal Heat Transfer Vinyl

Metallic Style Without the Weight!

Dazzle customers with this precious metal HTV! Metal HTV features a smooth finish, soft hand, and a brushed metal appearance that can be washed and worn without becoming lackluster. Unlike other metallic heat transfers, Metal HTV is super light-weight so you can wear it on almost anything. This fashion forward material is ideal for bridal parties, spirit wear, cheer, dance, and any occasion that needs a gleaming touch! Use in conjunction with other materials such as EasyWeed or StripFlock for awesome designs that hit on multiple levels! Metal is layerable as a TOP LAYER ONLY on other materials. Check out this blog post on applying Metal HTV.

Metal is 100 Microns / 3.9 Mils and is a PET composition.



Metal Features

  Metal Shirt Design
Metal Silver   Metal Red   Metal Bronze   Metal Gold   Metal Silver Blue   Metal Blue   Metal Purple   Metal Tiger Lily

Metal Applies to:




Craft Cutter Settings


    Cricut:
Blade: Standard    Setting: Iron-on

    Silhouette Cameo:    
Blade:
Standard, 2    Material: Heat Transfer, Smooth    Speed:     Force:  4

    Brother ScanNCut:    
Blade:
Standard, 2    Cut Speed: 1    Cut Pressure: 3


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.




Pro Cutter Settings


    Roland GX/GS-24:
Blade: 45°    Gram Force: 80-90    Offset: .250    Speed: 30-50 cm/s

    Graphtec:    
Blade:
45°    Force: 8-9    Tool: CB09+0    Speed: 30 cm/s

    MH, SC2, LP3, and Titan 1:    
Blade:
45°/60°    Gram Force: 85-90    Speed: 300 mm/s *Blade Advancing Varies

    Titan 2 & 3:    
Blade:
45°/60°    Gram Force: 65-70    Speed: 300 mm/s *Blade Advancing Varies

    Mimaki CG-60SR III:    
Blade:
45°    Gram Force: 110    Offset: 30    Speed: 20-30 cm/s


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.




Application Instructions


Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier cold

Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold

Click here for a printable version of all HTV application instructions




Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean


Metal HTV Design