Metallic Heat Transfer Vinyl
Add a Gleaming Chrome Effect to Your Designs!
Siser Metallic Heat Transfer Vinyl is perfect for adding a chrome look to your designs. This mirror like material is unlike anything you’ve seen before! Available in gold and silver, Metallic’s rich and shiny finish stands out from the crowd. Metallic looks great on caps, tote bags, and home décor such as pillow covers.
Please note that Metallic is a unique product and that cracking and delamination may occur after washing. The results are not predictable.
Metallic is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
 |
 |
 |
 |
Specifications: PET Composition • Pressure sensitive backing • Gloss finish • 100 Microns/3.9 Mils • 45°/60° blade • Layering not reccomended
Cracking and delamination may occur after washing. Results are not predictable
|
Cricut: Blade: Standard |
Silhouette Cameo: Blade: Standard, 3 |
Scan N Cut: Blade: Standard, 2 |
|
Roland GS/GX-24: Blade: 45° |
Graphtec: Blade: 45° |
MH, SC2, LP3, and Titan 1: Blade: 45°/60° |
Titan 2 & 3: Blade: 45°/60° |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier cold |
Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier cold |
|
Metallic Applies to: 100% cotton |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before first wash |
Check the following links for more Metallic information and inspiration
