StripFlock® Heat Transfer Vinyl
The Only Flock in the Industry that can be Layered On Itself.
A great alternative to embroidery, StripFlock heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock excellent for retro designs or anytime you want a rich look. StripFlock looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs.
![]() |
![]() |
Specifications: PVC Composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils • 45°/60° blade • Can be layered
Cricut: Blade: Standard |
Silhouette Cameo: Blade: Standard, 4 |
Scan N Cut: Blade: Standard, 4 |
Roland GS/GX-24: Blade: 45° |
Graphtec: Blade: 45° |
Titan Series: Blade: 45°/60° |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15-20 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier cold |
Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 10-15 seconds • Peel carrier cold |
StripFlock Applies to: 100% cotton |
Recommended Accessories: Siser Weeder |
Laundering: Wait 24 hours before 1st wash |
Check the following links for more StripFlock information and inspiration