ColorPrint PU Print and Cut Material

Print and Cut Full-Color Designs with Incredible Stretch and Rebound!

Impress your customers with beautiful, vibrant graphics that are also lightweight and durable. Siser’s ColorPrint PU is a thin, stretchable print and cut material available in two finishes for all your project needs! Choose from ColorPrint PU Matte or Glossy. Compatible with eco-solvent, solvent, and latex based printers/cutters, ColorPrint PU creates great full color graphics. ColorPrint PU is thin enough to provide a great hand and stretchable enough for most performance wear. Plus it’s easy to use! Just print, cut, mask, and press!

Not compatible with Inkjet or toner based printers/copiers.


  ColorPrint™ PU 

ColorPrint PU Applies To:

Application instructions

• Set heater/dryer to 113°F / 45°C – 122°F / 50°C
• If printing heavy saturation ink, allow to dry 1 hour before cutting
• Print, cut, and weed design
• Mask with TTD Easy Mask or TTD High Tack Mask
• Cover design with Heat Transfer Cover Sheet
• Apply design at 295°F / 146°C with medium pressure for 15 seconds
• Peel carrier hot

Click here for a printable version of all print and cut application instructions

Recommended Accessories:

TTD Easy Mask or TTD High Tack Mask
Siser Weeder
Squeegee
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean or bleach