ColorPrint Sublithin Print and Cut Material

The Perfect Print and Cut Material for Sublimated Sports Garments!

Standard print and cut material isn’t formulated for use on sublimated jerseys. If you apply a regular printable polyurethane vinyl onto a sublimated garment, you’ll get what’s called “dye migration”. Dye migration is when the sublimation inks bleed through the vinyl, causing your designs to look muddy or splotchy. ColorPrint Sublithin is specially formulated to work with most eco-solvent and solvent based inks and printers to block this dye migration and keep your graphics looking sharp on most sublimated polyester garments! Great for use on polyester motocross, soccer and hockey jerseys with full sublimation.

ColorPrint Sublithinis approximately 110 microns/4.3 Mils and is a PU composition

Not compatible with Inkjet or toner based printers/copiers.



 
    ColorPrint™ PU  

ColorPrint Sublithin Applies To:

Application instructions

• Set heater/dryer to 113°F / 45°C – 122°F / 50°C
• Print, cut, and weed design
• Mask with TTD Easy Mask
• Cover design with Heat Transfer Cover Sheet
• Apply design at 265°F / 130°C with medium pressure for 15 seconds
• Peel carrier Hot

Click here for a printable version of all print and cut application instructions

Recommended Accessories:

TTD Easy Mask or TTD High Tack Mask
Siser Weeder
Squeegee
Multipurpose Paper or
Kraft Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Hang item to dry
Do not dry clean or bleach