EasyWeed Extra

EasyWeed® Extra Heat Transfer Vinyl

Our Best-Selling Heat Transfer Vinyl - Now for Nylon!

EasyWeed® Extra shares almost all the great benefits of EasyWeed, with the added bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier sheet so you can cut detailed designs and weed them effortlessly. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all the applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra - with its semi-gloss finish, can be layered, extending your creativity and allowing you to say "yes" to more complicated designs.

EasyWeed Extra is 90 Microns / 3.5 Mils and is a PU composition.




EasyWeed Extra Features

  EasyWeed Extra Shirt Design


            EasyWeed Extra White              

EasyWeed  Extra Applies to:




Craft Cutter Settings


    Cricut:
Blade: Standard    Setting: Iron-on

    Silhouette Cameo:    
Blade:
Standard, 2    Material: Heat Transfer, Smooth    Speed: 8    Force: 4

    Brother ScanNCut:    
Blade:
Standard, 2    Cut Speed: 1    Cut Pressure: 1


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.




Pro Cutter Settings


    Roland GX/GS-24:
Blade: 45°    Gram Force: 80-90    Offset: .250    Speed: 25-50 cm/s

    Graphtec:    
Blade:
45°    Force: 8-9    Tool: CB09+0    Speed: 30 cm/s

    MH, SC2, LP3, and Titan 1:    
Blade:
45°/60°    Gram Force: 80-85    Speed: 300 mm/s *Blade Advancing Varies

    Titan 2 & 3:    
Blade:
45°/60°    Gram Force: 80-85    Speed: 300 mm/s *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.




Application Instructions


Home Iron / Cricut EasyPress® Instructions

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Heat Press Instructions     

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 5-10 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions




Recommended Accessories:

Siser Weeder
Multipurpose Paper or
Heat Transfer Cover Sheet

Laundering:

Wait 24 hours before first wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean


EasyWeed Extra Design